Tiny car tweaks that can prevent big problems: what you should know about fuel injector cleaners, wheel alignment, and bearings

A car is probably the biggest purchase you’ll ever make, aside from property. It’s a big, hefty hunk of metal, and it can be easy to treat it as a gigantic machine that’s indestructible. A lot of us only get down to the nitty gritty of a car when it breaks down, and we need to fix a massive part, or when something goes catastrophically wrong.

Today on the blog, we’re going to take a look at some tiny parts of your car that have a really significant impact on how the whole thing runs. These are all things you can stay on top of to make sure your vehicle performs safely, powerfully and reliably.

First on our list are the fuel injectors. They’re some of the smallest components in the whole car, but they’re also some of the most crucial. Your fuel injectors are responsible for taking the gas from the fuel line to the firing chamber inside the engine, which runs on combustion.

car engine

Now, if you’ve ever taken a chemistry class, you know that fires can’t start without air. To get a good blaze, you need a balance between the amount of fuel and the amount of air your spark has to work with. Gas engines work on the same principle. If fuel flows or trickles into the combustion chamber, it doesn’t light all that well. There’s too much fuel, and not enough air. Enter the fuel injectors which you can learn more about on this fuel system cleaner review. Since we’ve been using them, they’ve made gas motors much, much more efficient. They take that flowing gasoline and project it in a fine spray into the firing chamber. So, instead of a stream of gas that’s hard to light, you end up with misted droplets that give the spark lots of surface area and air content to use for ignition.

When a fuel injector is spraying properly, you get maximum power from your engine, since you’re getting a better combustion, and you’re getting better fuel economy, since fuel is burning more efficiently. But when your injectors get clogged up over time (thanks to soot and ethanol content in fuels), they start firing at wonky angles, or spraying sluggishly. So, that tiny component ends up being the weakest link in your power train.

Luckily, there are very convenient ways to deal with grimy injectors. Fuel injector cleaners are available pretty cheaply at auto parts shops, and you don’t need any mechanical aptitude to use them. You just pour them into the gas line and drive them through until your tank is close to empty. Done! It seems almost too easy, but cleaning out fuel injectors may be the single biggest thing you can do to improve performance, especially with older vehicles. That’s even more true now that the government has mandated that 10% of all US gasoline be ethanol, which is especially gunky.

So, fuel injector cleaners are your number one tiny fix with big results for vehicles.

Next up is a fairly mundane topic, but one that has significant impacts on how you drive, and how much fuel you use: your tire pressure. You should always be adjusting your tire pressure based on the roads you drive. In rural areas, lower pressures are best. That’s also true in winter conditions. Higher tire pressures give you much better fuel economy and handling on nicely paved roads.

Handling is a subjective experience for most drivers, but it can get a lot more concrete in a hurry when you lose control of your vehicle. One small but easy way to give yourself better control around corners and in messy conditions is to have your mechanic check your wheel alignment when they change your oil. Just a degree or two of misalignment can be enough for you to take a wrong turn and end up in a ditch or worse, in a crash. If you have your mechanic take a quick look every service appointment, you won’t have anything to worry about.

man mechanic

Finally, let’s take a moment to talk about bearings. Ball bearings are probably the most important component on your car, as far as safety is concerned. The big problem is, most of us don’t learn about them until it’s too late. Ball bearings hold your wheels on, in the simplest terms, and when they break, there goes your wheel, and any hope of controlling your vehicle. It’s why you should always talk to your mechanic about even the slightest hum, throbbing or thumping noise from your vehicle, especially if you can trace it to a specific corner. You’ll be able to tell if one is getting ready to go, which means you can replace it before it completely self-destructs.

There you go: four simple fixes you can make to tiny car components that will pay off in big ways! Oh and by the way, you should go to fuelinjectorcleaner.xyz for complete information and recommendations on fuel injector cleaning kits.